Flammable – Centrum Scientific Instrument https://www.csi-globe.com Gas detector, indoor air quality, flame detector, emergency button, control system, broadcast intercom system, agent, distribution, Honeywell, MTI Wed, 16 Jul 2025 01:39:38 +0000 en-US hourly 1 https://wordpress.org/?v=6.8.5 https://www.csi-globe.com/wp-content/uploads/2023/12/cropped-IMG_0561-e1702477899453-32x32.webp Flammable – Centrum Scientific Instrument https://www.csi-globe.com 32 32 ITEL Pro Gas Detector (Stainless Steel) https://www.csi-globe.com/en/products-2/itel-pro-en/ Thu, 07 Dec 2023 05:38:48 +0000 https://www.csi-globe.com/?post_type=product&p=3952
 ITEL Pro  for MTI Product
Combustible/Toxic/VOC
The ITEL Pro multi-function gas detector is designed for use with sensor cartridge of catalytic , electrochemical , PID or NDIR type . ITEL Pro have 4~20mA , Relay , HART (option) & RS-485 signal output interface.
Applications- Petrochemical / Pharmaceutical / Chemical / Manufacturing / Aerosol Filling / Steel- Making / Semiconductor etc. hazardous areas
  • 4~20mA output (3-wire or 4-wire).
  • 4~20mA output mode can select Source , Sink , Isolated.
  • RS-485 (Modbus RTU) or HART output .
  • Relay output (A1,A2,Fault).
  • Display show Gas Name , Range , Value , Alarm (A1,A2&Fault).
  • Calibration & adjustment use a magnetic wand.
  • Use MTI Smart Swappable Module.
  • Up to 5 points calibration.
  • Calibration Remind (180 days).
  • CNS approved for hazardous areas use.
  • Low maintenance cost & easy calibration.
]]> Specification
Output signals

Analogue : 4~20mA (3-wire or 4-wire)
Digital : RS-485 (Modbus RTU) or HART [Ver.7]
Relay : Fault/A1/A2 (30VDC/5A or 250VAC/5A)

Operating temperature

T6 : -40~+55°C
T5 : -40~+65°C
T4 : -40~+75°C

Operating relative

0~95%RH (non condensing)，1 atm±20%

Local Display

2 rows , 4 digital characters , 20 x 7 dot-matrix display

Display range

0~9999

Unit

%LEL、%VOL、ppm、mg/m3

Operating voltage

24VDC normal (12~32VDC)

Power consumption

< 6W

Installation

Wall or pipe mounting

Enclosure material

S.S.316

Weight

3.8Kg

Ingress protection

IP66

Feature

Adjust Alarm value, Alarm latching & action method
Self-test indication
4~20mA output test & Relay test
4、8、12、16、20mA output value adjusted
Password protection
5 point calibration (Zero&Span, 2 points, 3 points, 4 points or 5 points)

Approvals

CNS(ITRI) : Ex db IIC T6..T4 Gb + Ex tb IIIC T85°C Db

Test reports

CE-EMC/RFI : EN 50270 (2015)

]]> ITEL Plus Gas Detector (Aluminum) https://www.csi-globe.com/en/products-2/itel-plus-en/ Thu, 07 Dec 2023 05:36:53 +0000 https://www.csi-globe.com/?post_type=product&p=3955
ITEL Plus for MTI Product
Combustible/Toxic/VOC The ITEL Plus multi-function gas detector is designed for use with sensor cartridge of catalytic , electrochemical , PID or NDIR type . ITEL Plus have 4~20mA , Relay , HART (option) & RS-485 signal output interface.
Applications- Petrochemical / Pharmaceutical / Chemical / Manufacturing / Aerosol Filling / Steel- Making / Semiconductor etc. hazardous areas
  • 4~20mA output (3-wire or 4-wire).
  • 4~20mA output mode can select Source , Sink , Isolated.
  • RS-485 (Modbus RTU) or HART output .
  • Relay output (A1,A2,Fault).
  • Display show Gas Name , Range , Value , Alarm (A1,A2&Fault).
  • Calibration & adjustment use a magnetic wand.
  • Use MTI Smart Swappable Module.
  • Up to 5 points calibration.
  • Calibration Remind (180 days).
  • CNS approved for hazardous areas use.
  • Low maintenance cost & easy calibration.
]]> Specification
Output signals

Analogue : 4~20mA (3-wire or 4-wire)
Digital : RS-485 (Modbus RTU) or HART [Ver.7]
Relay : Fault/A1/A2 (30VDC/5A or 250VAC/5A)

Operating temperature

-40~+85°C

Operating relative

0~95%RH (non condensing)，1 atm±20%

Local Display

2 rows , 4 digital characters , 20 x 7 dot-matrix display

Display range

0~9999

Unit

%LEL、%VOL、ppm、mg/m3

Operatingvoltage

24VDC normal (12~32VDC)

Power consumption

< 6W

Installation

Wall or pipe mounting

Enclosure material

Transmitter housing : Aluminum alloy

Sensor housing : S.S.316

Weight

2.2Kg

Ingress protection

IP66

Feature

Adjust Alarm value, Alarm latching & action method
Self-test indication
4~20mA output test & Relay test
4、8、12、16、20mA output value adjusted
Password protection
5 point calibration (Zero&Span, 2 points, 3 points, 4 points or 5 points)

Approvals

CNS : Ex db IIC T6 Gb X + Ex tb IIIC T85°C Db X

Test reports

CE-EMC/RFI : EN 50270 (2015)

]]> ITEL Gas Detector https://www.csi-globe.com/en/products-2/itel-en/ Thu, 07 Dec 2023 05:31:06 +0000 https://www.csi-globe.com/?post_type=product&p=3956 ITEL for MTI Product Combustible/Toxic/VOC
The ITEL multi gas detector is designed for use with gas sensor of catalytic , electrochemical , PID or NDIR sensor cartridge. ITEL have 4~20mA , Relay , HART(option) & RS-485 signal output interface.
Applications- Petrochemical / Pharmaceutical / Chemical / Manufacturing / Aerosol Filling / Steel-Making / Semiconductor etc. hazardous areas
  • 4~20mA output (3-wire or 4-wire).
  • RS-485 (Modbus RTU) or HART output.
  • Relay output (A1,A2,Fault).
  • Calibration and adjustment use a magnetic wand.
  • Display are shown the gas name , range , reading and alarm(A1,A2,Fault).
  • UL/CNS/CPA approved for hazardous areas use.
  • CE approved for RFI/EMC protection.
  • CE approved for EFT/Burst Immunity.
  • Low maintenance cost and easy calibration.
]]> Specification
Principle

Catalytic / Electrochemical / PID / NDIR

Output signals

Analogue : 4~20mA (3-wire or 4-wire)
Digital : RS-485 (Modbus RTU) or HART [Ver.7]
Relay : Fault/A1/A2 (30VDC & 2A)

Operating temperature

Standard : -20~+60°C
High : -40~+85°C (option)

Operating conditions

0~99%RH , 100%RH (non condensing) , 1 atm±20%

Local Display

LED : 2 rows , 4 digital characters, 20 x 7 dot-matrix display
LCD : back-lit biserial display
Tricolor LCD : back-lit biserial display (Normal : Green / Alarm : Red / Fault : yellow)

Display range

0~100%LEL / 0~100%VOL / 0~9999ppm / 0~9999mg/m3 (can be set by user)

Operating voltage

24VDC normal (18~32VDC)

Power consumption

< 6W

Installation

Wall or pipe mounting

Enclosure material

Transmitter housing : Aluminum alloy or S.S.316

Sensor housing : S.S.316

Weight

Aluminum alloy : 2.2kg ; S.S.316 : 6.5kg

Ingress protection

IP 66 with corrosion-resistant ; NEMA 4X

Feature

Adjustable alarm settings
Latching / Non-Latching alarms
Self-test indication
Simulation / Calibration 4-20mA output
Password protected

Approvals (Aluminum alloy only)

UL : Class I , Division 1 , Groups B , C & D
Class II , Division 1 , Groups E , F & G ; NEMA 4X
CPA (China)

Approvals

CNS(ITRI) : Ex d IIC T6 Gb + Ex tb IIIC T85°C Db

Test reports

EMC/RFI CE : EN61000-6 -2/-4
EN 50270
EFT/Burst Immunity CE : EN61000-4 -4

]]> 6000-KD Pro Combustible Gas Detector(Stainless Steel) https://www.csi-globe.com/en/products-2/6000-kd-pro-en/ Thu, 07 Dec 2023 05:29:36 +0000 https://www.csi-globe.com/?post_type=product&p=3958 6000-KD Pro  for MTI Product
Combustible
The 6000-KD Pro Combustible gas detector is designed for use with sensor cartridge of catalytic , electrochemical , PID or NDIR type . 6000-KD Pro have 4~20mA , Relay , HART (option) & RS-485 signal output interface.
Applications- Petrochemical / Pharmaceutical / Chemical / Manufacturing / Aerosol Filling / Steel- Making / Semiconductor etc. hazardous areas
  • 4~20mA output (3-wire or 4-wire).
  • 4~20mA output mode can select Source , Sink , Isolated.
  • RS-485 (Modbus RTU) or HART output .
  • Relay output (A1,A2,Fault).
  • Alarm (A1,A2&Fault).
  • Calibration & adjustment use a magnetic wand.
  • Use MTI Smart Swappable Module.
  • Up to 5 points calibration.
  • Calibration Remind (180 days).
  • CNS approved for hazardous areas use.
  • Low maintenance cost & easy calibration.
]]> Specification
Output signals

Analogue : 4~20mA (3-wire or 4-wire)
Digital : RS-485 (Modbus RTU) or HART [Ver.7]
Relay : Fault/A1/A2 (30VDC/5A or 250VAC/5A)

Operating temperature

T6 : -40~+55°C
T5 : -40~+65°C
T4 : -40~+75°C

Operating relative

0~95%RH (non condensing)，1 atm±20%

Local Display

4 digital characters

Display range

0~9999

Unit

%LEL、%VOL、ppm、mg/m3

Operating voltage

24VDC normal (12~32VDC)

Power consumption

< 6W

Installation

Wall or pipe mounting

Enclosure material

S.S.316

Weight

3.8Kg

Ingress protection

IP66

Feature

Adjust Alarm value, Alarm latching & action method
Self-test indication
4~20mA output test & Relay test
4、8、12、16、20mA output value adjusted
Password protection
5 point calibration (Zero&Span, 2 points, 3 points, 4 points or 5 points)

Approvals

CNS(ITRI) : Ex db IIC T6..T4 Gb + Ex tb IIIC T85°C Db

Test reports

CE-EMC/RFI : EN 50270 (2015)

]]> 6000-KD Plus Combustible Gas Detector(Aluminum) https://www.csi-globe.com/en/products-2/6000-kd-plus-en/ Thu, 07 Dec 2023 05:28:37 +0000 https://www.csi-globe.com/?post_type=product&p=3959 6000-KD Plus  for MTI Product
Combustible
The 6000-KD Plus Combustible gas detector is designed for use with sensor cartridge of catalytic , electrochemical , PID or NDIR type . 6000-KD Plus have 4~20mA , Relay , HART (option) & RS-485 signal output interface.
Applications- Petrochemical / Pharmaceutical / Chemical / Manufacturing / Aerosol Filling / Steel- Making / Semiconductor etc. hazardous areas
  • 4~20mA output (3-wire or 4-wire).
  • 4~20mA output mode can select Source , Sink , Isolated.
  • RS-485 (Modbus RTU) or HART output .
  • Relay output (A1,A2,Fault).
  • Alarm (A1,A2&Fault).
  • Calibration & adjustment use a magnetic wand.
  • Use MTI Smart Swappable Module.
  • Up to 5 points calibration.
  • Calibration Remind (180 days).
  • CNS approved for hazardous areas use.
  • Low maintenance cost & easy calibration.
]]> Specification
Output signals

Analogue : 4~20mA (3-wire or 4-wire)
Digital : RS-485 (Modbus RTU) or HART [Ver.7]
Relay : Fault/A1/A2 (30VDC/5A or 250VAC/5A)

Operating temperature

-40~+85°C

Operating relative

0~95%RH (non condensing)，1 atm±20%

Local Display

4 digital characters

Display range

0~9999

Operating voltage

24VDC normal (12~32VDC)

Power consumption

< 6W

Installation

Wall or pipe mounting

Enclosure material

Transmitter housing : Aluminum alloy

Sensor housing : S.S.316

Weight

2.2Kg

Ingress protection

IP66

Feature

Adjust Alarm value, Alarm latching & action method
Self-test indication
4~20mA output test & Relay test
4、8、12、16、20mA output value adjusted
Password protection
5 point calibration (Zero&Span, 2 points, 3 points, 4 points or 5 points)

Approvals

CNS : Ex db IIC T6 Gb X + Ex tb IIIC T85°C Db X

Test reports

CE-EMC/RFI : EN 50270 (2015)

]]> 6000-KD Combustible Gas Detector https://www.csi-globe.com/en/products-2/6000-kd-en/ Thu, 07 Dec 2023 05:27:57 +0000 https://www.csi-globe.com/?post_type=product&p=3960 6000-KD for MTI Product Combustible
The 6000-KD Combustible gas detector is designed for use with gas sensor of catalytic , electrochemical , PID or NDIR sensor cartridge. 6000-KD have 4~20mA , Relay , HART(option) & RS-485 signal output interface.
Applications- Petrochemical / Pharmaceutical / Chemical / Manufacturing / Aerosol Filling / Steel-Making / Semiconductor etc. hazardous areas
  • 4~20mA output (3-wire or 4-wire).
  • RS-485 (Modbus RTU) and relay output.
  • HART output (option).
  • Calibration and adjustment use a magnetic wand.
  • CNS/CPA approved for hazardous areas use.
  • CE approved for RFI/EMC protection.
  • CE approved for EFT/Burst Immunity.
  • Low maintenance cost and easy calibration.
]]> Specification
Principle

Catalytic

Output signals

Analogue : 4~20mA (3-wire or 4-wire)
Digital : RS-485 (Modbus RTU) or HART [Ver.7]
Relay : Fault/A1/A2 (30VDC & 2A)

Operating temperature

Standard : -20~+60°C
High : -40~+85°C (option)

Operating conditions

0~99%RH , 100%RH (non condensing) , 1 atm±20%

Local Display

LED : 4 digital characters LED display
LCD : back-lit biserial display
Tricolor LCD : back-lit biserial display (Normal : Green / Alarm : Red / Fault : yellow)

Display range

LED : 0~100%LEL
LCD : 0~100%LEL / 0~9999ppm

Operating voltage

24VDC normal (12~32VDC)

Power consumption

< 6W

Installation

Wall or pipe mounting

Enclosure material

Transmitter housing : Aluminum alloy or S.S.316

Sensor housing : S.S.316

Weight

Aluminum alloy : 2.2kg ; S.S.316 : 6.5kg

Ingress protection

IP 66 with corrosion-resistant

Feature

Adjustable alarm settings
Latching / Non-Latching alarms
Self-test indication
One-Man calibration

Approvals (Aluminum alloy only)

CNS : Ex d IIC T6 Gb + Ex tb IIIC T85°C Db
CPA (China)

Approvals

EMC/RFI CE : EN61000-6 -2/-4
EN 50270
EFT/Burst Immunity CE : EN61000-4 -4

]]> 6000-KN Combustible Gas Detector https://www.csi-globe.com/en/products-2/6000-kn-en/ Thu, 07 Dec 2023 05:26:11 +0000 https://www.csi-globe.com/?post_type=product&p=3961 6000-KN for MTI Product Combustible
The 6000-KN combustible gas detector is designed for use with catalytic sensor , featuring 4~20mA , HART (option) or mV output (option) .
Applications- Petrochemical / Pharmaceutical / Chemical / Manufacturing / Aerosol Filling / Steel-Making / Semiconductor etc. hazardous areas
  • 4~20mA output (3-wire or 4-wire).
  • HART output (option).
  • mV output (option).
  • CNS/CPA approved for hazardous areas use.
  • CE approved for RFI/EMC protection.
  • CE approved for EFT/Burst Immunity.
  • Low maintenance cost and easy calibration.
]]> Specification
Principle

Catalytic

Output signals

4~20mA , 4~20mA (HART) or mV

Operating conditions

Standard : -20~+60°C, 0~99%RH , 100%RH (non condensing), 1 atm±20%

Display range

0~100%LEL

Operating voltage

4~20mA & HART : 24VDC normal (12~32VDC)
mV : 5VDC normal

Operating current

mV : 200mA

Power consumption

< 3W

Installation

Wall or pipe mounting

Enclosure material

Transmitter : Aluminum alloy ; Sensor : S.S.316

Weight

2.16kg

Ingress protection

IP 66 with corrosion-resistant

Feature

Over-current protection
Self-test indication

Approvals

CNS : Ex d IIC T6 Gb
CPA (China)
CE : EN61000-6 -2/-4
EFT/Burst Immunity CE : EN61000-4 -4

]]> 9500 Gas Detector https://www.csi-globe.com/en/products-2/9500-en/ Thu, 07 Dec 2023 04:00:34 +0000 https://www.csi-globe.com/?post_type=product&p=3971 9500 for MTI Product
Combustible/Toxic/VOC The 9500 gas detector is designed for use with catalytic, electrochemical, PID and NDIR sensor cartridge, featuring 4~20mA, RS-485 and relay output.
Applications- Petrochemical / Pharmaceutical / Chemical / Manufacturing / Aerosol Filling / Electronics / Semiconductor / Steel-making / Parking lot / Office / School / Lab. etc. non-hazardous areas
  • 4~20mA output (3-wire or 4-wire).
  • RS-485 (Modbus RTU) output and Dry Contact.
  • Use MTI Smart Sensor Technology (Plug & Play).
  • CE approved for RFI/EMC protection.
  • Low maintenance cost and easy calibration.
]]> Specification
Principle

Catalytic / Electrochemical / PID / NDIR

Output signals

Analogue : 4~20mA (3-wire or 4-wire)
Digital : RS-485 (Modbus RTU)
Relay : Fault/A1/A2 (30VDC/5A or 250VAC/5A)

Operating conditions

-10~+50°C , 0~99%RH , 100%RH (non condensing) , 1 atm±20%

Local Display

LCD : back-lit biserial display

Display range

0~100%LEL / 0~100%VOL / 0~9999ppm / 0~9999mg/m3 (according to the smart sensor)

Operating voltage

24VDC normal (12~32VDC)

Power consumption

< 6W

Installation

Wall or pipe mounting

Enclosure material

Detector : ABS

Sensor housing : Aluminum Alloy or S.S.316

Weight

0.8kg

Ingress protection

IP 65

Feature

Adjustable alarm settings
Over-current protection
Fault indication
One-Man calibration
5 point calibration (Zero&Span , 2 points , 3 points , 4 points or 5 points)
Customized name (10 characters)

Approvals

CE : EN61000-6 -2/-4

]]>